Traps for floor level showers.
An effective system for creating floor even showers.
It consists of a main trapped body and a wide range of grids in various sizes that allow floor even showers to be created in various dimensions.
The adjustment of the height of the grid support and the trap body allows adaptation to different installation requirements and to different covering depths.
50 mm hydraulic seal
Trap body in ABS for improved adhesion to sealants
Trap body height adjustment
Adjustment of grating support in stainless steel allows the perfect match with the thickness of the tiles
Grating length: 300-700-800-900-1000-1200 mm
The package includes:
The grid must be purchased separately.
After fixing the supports to the trap body, connect the waste pipe to the trap body (diameter 50 mm), adjust the height of the feets to reach the desired height.
Verify the correct planarity of the trap body with a spirit level.
Create the slab with an adequate slope for correct drainage (minimum slope 2%).
Proceed with the waterproofing of the floor and walls.
Remove the protection in expanded polystyrene and adjust the height of the grid support to the depth of the covering. Proceed with tile laying.
If using the tiled grid, after laying the covering in the grid, place it in the support.
Before inserting the Valsir design grid, proceed with the installation of the suitable spacers.
To clean the system just remove the grid and the conveyor.